How To Replace Lazy Boy Recliner Seat Springs Like a Pro?

Do you want to know about “How to Replace Lazy Boy Recliner Seat Springs?” Replacing the seat springs in a Lazy Boy recliner is a relatively simple process that can be done at home with the right tools and patience. Over time, the springs in your recliner can wear out or become damaged, causing the seat to sag and discomfort. Following a few steps, you can replace the springs and restore the comfort of your favourite recliner.

The Importance of Proper Installation:

Let’s get into the importance of proper installation. The springs are crucial in providing support and comfort to your recliner. They are responsible for absorbing and distributing your body weight evenly, allowing you to relax and unwind after a long day.

  • Correct configuration: When installing the new springs, it’s essential to ensure that they are attached in the proper configuration. This means following the same pattern as the old springs, as it has been specifically designed to provide optimal support. By maintaining the original configuration, you can ensure that the recliner functions as intended, providing you with the utmost comfort.
  • Balance in tension: As you secure the springs using needle-nose pliers, it’s important to exercise caution. Overtightening or stretching the springs can lead to imbalances in tension, resulting in an uneven seat. This can cause discomfort and may even affect the longevity of your recliner. Take your time and ensure each spring is securely fastened without being overly tightened.
  • Smooth reclining: Testing the tension of each spring as you attach them is highly recommended during installation. This step allows you to make necessary adjustments to ensure a balanced and comfortable seat. By checking the tension, you can promptly identify and address any discrepancies, guaranteeing a smooth reclining experience.

Remember that proper installation of the new springs is vital for the longevity and performance of your Lazy Boy recliner. Taking the time to install them correctly will enhance your comfort and extend the lifespan of your beloved piece of furniture. So, pay attention to the details, follow the instructions, and enjoy the renewed support and relaxation your recliner will provide.

Step-by-Step Guide on How to Replace Lazy Boy Recliner Seat Springs:

Here are a simple process for replacing a lazy boy recliner seat springs:

Gather the Necessary Tools for the Job:

Before replacing the seat springs in your Lazy Boy recliner, and you’ll need to gather the necessary tools. These include:

  • Flathead screwdriver: The flathead screwdriver is essential as it allows you to easily loosen and remove the screws without damaging the recliner’s frame. Choose a screwdriver with a comfortable grip to prevent hand fatigue.
  • Needle-nose pliers: The needle-nose pliers are perfect for gripping and manipulating small parts, such as the springs and staples. They have long, thin jaws that allow you to remove old springs and attach new ones securely and easily.
  • Replacement springs: When it comes to replacement springs, it’s crucial to choose the springs that match the size and strength of the original ones to ensure proper support and comfort. Take the time to measure and compare the old springs with the replacements to ensure a perfect fit.
  • Staple gun: The staple gun is a powerful tool for securing the springs to the recliner’s frame. It provides a strong and reliable hold, ensuring the springs stay in place even with regular use. Look for a staple gun with adjustable power settings to accommodate different materials and prevent damage to the frame.
  • Heavy-duty staples: Lastly, heavy-duty staples are essential for attaching the springs securely. These staples are thicker and stronger than regular staples, providing extra support and preventing them from coming loose over time. Make sure to choose the right size of staples that match the staple gun you’re using.

By gathering all these tools before starting the seat spring replacement process, you’ll be well-prepared and ready to tackle the job confidently. Remember to work carefully and follow the manufacturer’s instructions to ensure a successful and long-lasting repair.

Preparing the Recliner for the Spring Replacement:

Before you can start removing the old springs, you’ll need to prepare the recliner for the replacement. 

Start by flipping the recliner upside down and locating the fabric covering the bottom of the seat. Use a flathead screwdriver to remove the staples holding the fabric in place carefully. Once the fabric is terminated, you’ll have clear access to the springs. 

Inspecting the springs is an essential step in recliner repair. Look for signs of wear and tear, such as rust, broken coils, or sagging. If the springs are in relatively good condition, you may only need to replace a few. However, if the springs are severely damaged or worn out, it’s best to replace all of them to ensure optimal comfort and support.

Consider their tension and flexibility when examining them. Springs that are too loose or too tight can affect the recliner’s ability to provide proper support. If you notice any issues with the tension, you may need to adjust or replace the springs accordingly.

Another factor to consider is the type of springs used in your recliner. Different types are available, including coil springs, sinuous springs, and webbing. Coil springs are the most common and provide excellent support, while sinuous springs offer a more budget-friendly option. On the other hand, webbing is often used with different types of springs to enhance durability.

After assessing the condition of the springs and deciding on the replacement strategy, it’s time to gather the necessary tools and materials. Depending on the type of recliner and springs, you may need a spring stretcher, pliers, wire cutters, or a staple gun. Having all the required tools on hand ensures a smooth and efficient replacement process.

Before proceeding with the spring replacement, it’s a good idea to take some measurements to ensure the new springs are the correct size. Measure the length and width of the old springs and the distance between them. This will help you find suitable replacements that match the original specifications and ensure a proper fit.

Once you have completed these preparatory steps, you’ll be ready to move on to the next phase of the recliner repair process. Removing the old springs and installing the new ones requires careful attention to detail and precision. 

Choosing the Right Replacement Springs:

When choosing replacement springs for your Lazy Boy recliner, selecting the correct type and size is important to ensure proper support and comfort.

  • Find replacement springs: Try to find replacement springs from the same manufacturer or a reputable source specialising in recliner parts. This will help ensure high-quality springs are designed to fit your specific recliner model.
  • Consider the gauge: Moreover, consider the gauge of the springs and the weight capacity they can handle. This will depend on your preference and the size of the person using the recliner.

Type of Springs:

When it comes to the type of springs, there are a few options. 

  • Coil springs: One common type is the coil springs, which are made of steel and provide excellent support. These springs are often used in high-quality recliners and are known for their durability.
  • Sinuous springs: Another option is the sinuous springs, also known as zigzag springs. These springs are made of heavy-gauge steel wire formed into a continuous zigzag pattern. They are commonly used in lower-priced recliners and provide good support, although they may not be as durable as coil springs.
  • S-type Springs: S-type springs, also known as serpentine springs, are another popular option in Lazy Boy recliners. These springs are shaped like an “S” and are made from heavy-gauge wire. They provide excellent support and distribute weight evenly across the seat. S-type springs are known for their long-lasting performance and are often favoured for their ability to withstand heavy use.
  • Hybrid: It’s worth noting that some recliners may use a combination of coil and sinuous springs to provide the best durability and support. This hybrid system can offer a comfortable and long-lasting seating experience.

Each type of spring requires a slightly different approach for removal and replacement. Therefore, it is crucial to accurately identify the type of spring used in your recliner before proceeding with any maintenance or repairs. By knowing the specific type of spring, you can ensure that you follow the appropriate steps and use the correct tools to achieve the best results.

Size of the springs:

  • Consider the dimensions: When it comes to the size of the springs, it’s important to consider the dimensions of your recliner. Measure the length and width of the seat and backrest to ensure that the replacement springs will fit properly. It’s also a good idea to check the height of the springs to ensure that they will provide the desired level of support.
  • Consider weight capacity: Weight capacity is another important factor when choosing replacement springs. Different springs have different weight limits, so it’s essential to select springs that can handle the weight of the person who will be using the recliner. This will help prevent the springs from sagging or breaking, ensuring a comfortable and safe seating experience.

Removing the Old Springs:

You can now begin removing the old springs. This step can be tricky, so take your time and be careful not to cause any damage to the recliner frame or upholstery.

  • Detach the springs: If your recliner has coil springs, you’ll need to use a pair of needle-nose pliers to detach the springs from the attached hooks or brackets carefully. You may need to use the pliers to stretch the springs and release them from their anchors for S-type or zigzag springs.
  • Keep track of each spring: Be sure to work methodically and track how each spring is attached, making installation of the new springs much easier.

Before you begin removing the old springs, it’s important to understand why they may need to be replaced. Over time, springs can lose their elasticity and become worn out, causing your recliner to sag or feel uncomfortable. By replacing the old springs, you can restore the support and comfort of your favourite recliner.

When removing coil springs, it’s crucial to handle them with care. These springs are typically made of high-tensile steel wire, which can be prone to snapping if mishandled. Take your time and use the needle-nose pliers to detach the springs from their hooks or brackets gently. If the springs are tightly wound, you may need to use some force, but be cautious not to damage the recliner frame or upholstery.

The removal process may require a different approach if your recliner has S-type or zigzag springs. These springs are typically anchored to the recliner frame using clips or brackets. Use the needle-nose pliers to stretch the springs and release them from their anchors. This may require strength and patience, as the springs can be tightly secured. Take your time and ensure that each spring is fully detached before moving on to the next one.

As you remove each spring, it’s a good idea to label or mark them to keep track of their positions. This will make the installation of the new springs much easier later on. You can use small adhesive labels or mark the springs with a permanent marker. Doing this ensures that each spring is returned to its original position, maintaining your recliner’s proper support and comfort.

Remember, working methodically and patiently is the key to successfully removing the old springs. Rushing through this process can lead to mistakes and potential damage to your recliner. Take your time, follow the instructions, and soon, you’ll be ready to install the new springs and enjoy the renewed comfort of your Lazy Boy recliner.

Installing the New Springs:

Once you’ve obtained the replacement springs, it’s time to install them in your Lazy Boy recliner. This step requires careful attention to detail to attach the springs securely and evenly.

  • Attach the new springs: Start by attaching the new springs to the hooks or brackets in the recliner frame, following the same configuration as the old springs. Use the needle-nose pliers to secure the springs, being careful not to overtighten or stretch them.
  • Test the tension: It’s a good idea to test the tension of each spring as you attach them, making adjustments as needed to ensure a balanced and comfortable seat.

Testing the Recliner for Proper Functionality:

After you’ve installed the new springs, it’s important to test the recliner for proper functionality. Sit in the chair and test the seat for any sagging or uneven support.

If the seat feels comfortable and provides even support, you’ve successfully replaced the springs. If you notice any issues, such as excessive sagging or uneven tension, you may need to readjust the springs or consider replacing them with a different type.

Tips for Longer-Lasting Springs:

To ensure that your newly replaced springs last as long as possible, consider following these tips:

  • Avoid excessive bouncing or jumping on the recliner
  • Refrain from sitting or standing on the footrest when it’s extended
  • Keep the recliner clean and free of debris, which can cause premature wear on the springs
  • Periodically check the springs and make any necessary adjustments or replacements

By taking good care of your recliner and being mindful of how you use it, you can extend the lifespan of the springs and maintain optimal comfort.

Troubleshooting Common Issues:

If you encounter any issues during the spring replacement process or after completing the repair, there are a few common problems that you might need to troubleshoot:

  • Uneven tension: Check that all the springs are attached securely and evenly. Adjust the tension of individual springs as needed.
  • Sagging seat: Make sure that the springs are providing enough support. Consider replacing the springs with a sturdier type if necessary.
  • Noisy recliner: Lubricate moving parts, such as hinges or pivots, to reduce noise. Check the springs for any signs of damage or wear.

By addressing these common issues and making necessary adjustments or repairs, you can ensure that your recliner remains comfortable and functional for years.

Cleaning the Recliner After the Repair:

After completing the spring replacement, cleaning your recliner thoroughly is a good idea. This will remove dirt or debris that may have accumulated during the repair process and keep your recliner looking its best.

Follow the manufacturer’s instructions for cleaning your specific recliner model. This may involve using a mild detergent, warm water, and a soft cloth to clean the fabric or upholstery gently.


Replacing the seat springs in a Lazy Boy recliner is a task that can be accomplished with a few tools and some basic knowledge. By following the steps outlined above, you can restore the comfort and functionality of your recliner, ensuring that it remains a favourite spot for relaxation for years to come.


Can I replace the seat springs in my Lazy Boy recliner myself?

Yes, replacing the seat springs in a Lazy Boy recliner can be done at home with the right tools and patience. However, it’s always best to consult a professional if you need clarification or are uncomfortable with the process.

How long do Lazy Boy recliner seat springs typically last?

A: The lifespan of seat springs in a Lazy Boy recliner can vary depending on usage, weight capacity, and maintenance. However, the springs can last for many years with proper care and occasional adjustments or replacements.

Where can I find replacement springs for my Lazy Boy recliner?

Replacement springs for Lazy Boy recliners can often be found through manufacturers or reputable sources specializing in recliner parts. Selecting the correct type and size of springs is important to ensure proper support and compatibility with your specific recliner model.

Can I use different types of springs to replace the originals in my recliner?

No, using the same type of springs as the originals is generally recommended to ensure proper support and functionality. However, if you’re experiencing issues or discomfort with the original springs, consider consulting a professional or exploring alternative options.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *